Multi-Tone Measurement (MTON)
Features and Benefits
- Multi-tone fundamental and distortion measurements
- SPL Max and max. voltage according to IEC 60268-21
- Continuous maximum SPL related to ANSI/CEA-2010-B, ANSI/CEA-2034
- Thermal compression
- Variable measurement and cooling time durations
- Measurement of wireless, active and passive speakers
- Get acoustic “Fingerprint”
- Flexibility on stimulus and threshold setup
- Protection limits to avoid the DUT destruction
- Temperature protection
The MTON Multi-tone Measurement is a Klippel R&D module which provides a complete measurement of the device under test (DUT) using a multi-tone stimulus. MTON offers different measurement modes to provide a high flexibility of measurement procedures.
While the Single Measurement mode performs a single multi-tone measurement, the Multiple Measurements: Voltage Increase mode offers an automatic test sequence to obtain the operation limits of the DUT related to mechanical and thermal compression as well as multi-tone distortion.
This flexibility in the threshold and stimulus configuration allows the MTON module to pinpoint the SPLmax according to IEC 60268-21 as well as the continuous max SPL (ANSI/CEA-2010-B and ANSI/CEA-2034) among other standard measurements.
Specification
Test Objects
- Any (except Suspension Parts)
Requirements
Test Hardware
PC
Software
- dB-Lab 210.820 or higher
Accessories
- Power amplifier
- KA3 Amplifier Card or
- 3rd party amplifier
- Microphone (optional)
- Laser (optional)
Templates
| MTON Rated Umax based on SPLmax @ SP1, IEC 60268-21 | Rated maximum input value Umax according IEC 60268-21 §17.1. |
| MTON Max SPL @ SP1, fixed level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.1.2b. |
| MTON Max SPL @ SP1, increased level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.1.2b with increased stimulus level to determine SPLmax. |
| MTON Short term max SPL @ SP1, fixed level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.3. |
| MTON Short term max SPL @ SP1, increased level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.3 with increased stimulus level to determine SPLshort. |
| MTON Long term max SPL @ SP1, fixed level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.4. |
| MTON Long term max SPL @ SP1, increased level; IEC 60268-21 | Rated maximum sound pressure according IEC 60268-21 §18.4 3 with increased stimulus level to determine SPLLong. |
| MTON SPL in stated frequency band @ SP1; IEC 60268-21 | Sound pressure level in a stated frequency band IEC 60268-21 §18.6. |
| MTON Short term ampl. comp. @ SP1; IEC 60268-21 | Short term amplitude compression according IEC 60268-21 §19.4.1. |
| MTON Long term ampl. comp. @ SP1; IEC 60268-21 | Long term amplitude compression according IEC 60268-21 §19.4.3. |
| MTON Multitone @SP1; IEC 60268-21 | Multitone Distortion according to IEC 60268-21 §23. |
| MTON Max. Usable SPL - cont @ SP1; ANSI/CEA-2010-B | Max. Sound Pressure Level related to ANSI/CEA-2010-B §6 |
Related Information
Other Modules of the R&D System
- Live Audio Analyzer (LAA)
Long-term monitoring of 5 signals simultaneously, examine time and frequency data, heating and ageing, measure distortion with music or arbitrary stimulus - Distortion Measurement (DIS)
Module performs a series of steady-state measurements by using a single- or two-tone excitation signal varied in frequency and voltage - Transfer Function Measurement (TRF)
Measurement of transfer function and harmonic distortion - Tone Burst Measurement (TMB)
Peak SPL measurement using tone burst signals - In-Situ Room Compensation (ISC)
Related Products
Literature and Papers
- Voishvillo, et. al. , “Graphing, Interpretation, and Comparison of Results of Loudspeaker Nonlinear Distortion Measurements,” J. Audio Eng. Society 52, No. 4 pp. 332-357 (Apr. 2004)
- W. Klippel: Physical and Perceptual Evaluation of Electric Guitar Loudspeakers
Standards
Consumer Electronics Association
CEA-2010-A (ANSI), CEA-2010-B (ANSI)
International Electrotechnical Commission
IEC 60268-21
